Shenzhen YDM Reflector Co., Ltd.

Plastic Solar Road Stud

Shenzhen YDM Reflector Co., Ltd.

Addr: 4/F, Bldg.3, Jingsheng Ind. Park, Huawang Rd, Dalang St, Longhua Dist, Shenzhen518109, China
Tel: +86-755-29814411 29814422
Fax: +86-755-28172054

  • Mini Ultra Thin Solar Road Stud
  • 迷你超薄_0003.JPG
  • 迷你超薄_0004.JPG
  • 迷你超薄_0005.JPG
  • 迷你超薄_0002.JPG
  • 迷你超薄_0012.JPG
  • 迷你超薄_0013.JPG
  • MINI黄色黄色03.jpg
  • MINI黄色黄色04.jpg

Mini Ultra Thin Solar Road Stud


Characteristic:Mini size with 9.8mm thickness, lighter weight, Flexible solar panel, 10ton compression resistance.
Description:Mini size, ultra thin design, reduce the impact from car or cycle Flexible solar panel 10 tons compression resistance Anti-impact and IP68 design.
  • Description
  • Specifications
  • Model
  • Drawings
  • Installation
  • Application

Key Features:

Mini size, ultra thin design, reduce the impact from car or cycle

Flexible solar panel

10 tons compression resistance  

Anti-impact and IP68 design.

Spot lighting:

9.8mm height only

flexible solar panel

Polycarbonate+ epoxy filler




IP 68


 Size  103x85x9.8mm
 Net Weight  0.107kg
 Material  Polycarbonate+ epoxy filler
 LED  Φ3mm, one-way 2 LED or two-way 4 LED
Light  steady, or flash (2HZ or upon request)
Luminous intensity  5000mcd
View distance  over 500m
Color  white, yellow, red, blue, green
Solar Panel  Flexible solar panel 4V 80ma
Battery  LiFePO4 3.2V 300MAH
Battery Life span  More than 3 Years
Full charge time  5 hours @100 Klux(sunny day)
Working time  40 hours after full charge
Activation  photo sensor
Starting intensity  800Lux
Compression resistance  over 10 tons
Working temperature  -20~+80
Water ingress rating  IP68
Warranty  1 years for foot path

Item No.:

 RSPS-F2-US-MH  LED horizontal steady
 RSPS-F2-UF-MH  LED horizontal Flash
 RSPS-F2-US-MV  LED vertical Steady

RSPS  RS  Road Stud  P  Plastic  S  Solar

F1 Flexible solar panel One Side 

F2 Flexible solar panel Two Side 

F  Flash  S  Steady

H  Horizontal  V  Vertiacl

U  Ultra Thin

M  Mini

1.Before installation, solar road studs shall be charged under sunlight for 1 hr, to check the studs can work normally.

2.Placing security isolation facilities for installation work is most important and must not be ignored. In the whole process of dynamic construction, no matter in an new closed road or a running road, every installers shall be in the isolation area.

If in a running road, the ratio between security personnel and the installing personnel shall be 1:1; If in a closed road, 1:3. 

3.Locate the installing position and ensure it is flat. For curving, cracked or uneven pavement, straighten it prior to installation. 

4.Clean the installation location with a brush, meanwhile ensure the location is dry. 

5.Glue the road stud thoroughly with proper amount of epoxy glue. 

6.Firmly mount the stud on the fixing location & ensure the reflective part is facing the right traffic direction. Do clean the spilled epoxy glue if excessive amount is used.

7.Inspect the installed studs within 2hrs after installation, ensuring that all the studs are fixed in correct direction or not crooked.

8.Remove the isolation facilities in 4hrs after the stud’s installing glue is thoroughly cured.

• Foot Path

• Parking lot

• Road Delineation

• Cycle path

• Accident black-spots / cluster sites

• Hazardous road layouts

• Areas adversely affected by poor visibility